3-Axis Accelerometer 10G High Performance, 3-axis Accelerometer Reliable Packaging with Screw-Down Mounting Factory Calibrated Axes: TRI Span(g): ±10 Sensitivity (mV/g): 200 Noise (mg rms): 10 Bandwidth (Hz): DC-100
The LP Series accelerometers are low cost, general purpose, linear acceleration and/or vibration sensors
available in ranges of ± 4 g, ± 10 g, ± 25 g, ± 50 g, and ± 100 g. Frequent applications are automotive
testing, instrumentation, and equipment monitoring. The LP Series sensing element is a silicon micro-machined capacitive beam. The capacitive beam is held in force balance for full scale non-linearity of
less than 0.2 %.
The LP Series offers wide dynamic range, has excellent frequency response, operates on a single +5 VDC power supply, and is
easy to interface to standard data acquisition systems. The scale factor and the 0 g output level are both ratiometric to the power supply so the accelerometer and any following circuitry will track each other if the supply voltage varies. Alternatively,
by specifying the -R option, an unregulated 8-30 V power supply can be used. The CXL50LP3 and other LP
Series sensors provide a direct high-level analog voltage output. The output requires no external signal
conditioning electronics and may be directly interfaced to an A/D or other data acquisition hardware.
Compared to traditional piezoelectric and piezoresistive accelerometer
technologies, the silicon micro-machined sensors offer equivalent performance at a significantly